Since 2006, Focus on rubber seals

Hydraulic/Pneumatic Seals

Home  > new category  > Hydraulic/Pneumatic Seals  > 

Antiaging Molded Black Rubber Parts for Machines

Antiaging Molded Black Rubber Parts for Machines

Add success, do you want to check your shopping cart?


Basic Info.

Model NO.
any sizes
Dongguan, Guangdong, China
HS Code
Antiaging Molded Black Rubber Parts For Machines

Basic Info.:
NO.ItemDescription of the item
1MaterialRubber, including NBR, SIL, FKM, PU, HNBR and so on
2ColorBlack, also can make blue, yellow, red , white, purple, gray
3HardnessFrom 30 to 90 shore A / IRHD
4CertificatesISO9001:2008, TS16949:2009, RoHs, Reach, FDA, UL


ISO9001:2008, TS16949:2009, UL
Antiaging Molded Black Rubber Parts for Machines
RoHs, Reach and FDA reports
Antiaging Molded Black Rubber Parts for Machines

Company Profile:

Rui Chen Sealing Co., Ltd was built in 2006, now there are more than 200 staffs. The company has two branches in Guangdong and Jiangxi, They are Dongguan Rui Chen Sealing Co., Ltd. and Shangrao Rui Chen Sealing Co., Ltd.. 
Our company aims at meeting the needs of customers, meanwhile, we have good faith, keep a contact and ensure the quality of products. When necessary we will assist customers to do the relevant design (such as mold development), saving resources in the development of new products, shorten the development cycle, reduce the potential failure. So we have won the trust of our customers. Now we have nearly 200 customers who are famous at home and abroad.
In 2009, the company launched its Enterprise Resource Planning (ERP) system to monitor production planning, delivery, quality statistics and analysis, etcetera, to further improve the control during all the process and customer service.
Antiaging Molded Black Rubber Parts for Machines

Delivery & Shiping:

Delivery: PE bags inside, cartons outside;
Shiping: Small quantity by air freight, large quantity by ship.
Antiaging Molded Black Rubber Parts for Machines


1,Are you manufacture or trading company ?
We are manufacture, we have two factories, one located in Shangrao City, Jiangxi Province, one in Dongguan City, Guangdong Province

2,Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you can get them for free,
only need to pay for the express cost.

3,What's the term of payment ?
Amount < US$1000,  100% paid in advance by paypal or T/T;
Amount >= US$1000,  30%  paid in advance, 70% paid before shipment by T/T. 

4,Can you produce OEM products ?
Yes, we can produce products by your drawing or samples.

5,What's your MOQ ?
If we have the products in stock , the quantity by your requirement, If we don't have them in stock:
NBR, SIL, SBR, EPDM, NR: 100 US$;  PU, HNBR, FKM: 150 US$
The product sells well throughout the world and is well received by users. It stands up to a wide range of pressures. The product can meet the various needs of customers and is increasingly used in the global market. It stands up to a wide range of pressures.
Product Message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...
Thank you for your enquiry. We will get back to you ASAP