Colorful and Different Size Silicone Rubber O-RingBasic Info.:
An O-ring, also known as a packing or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
The O-ring may be used in static applications or in dynamic applications where there is relative motion between the parts and the O-ring. Dynamic examples include rotating pump shafts and hydraulic cylinder pistons. Static applications of O-rings may include fluid or gas sealing applications in which: (1) the O-ring is compressed resulting in zero clearance, (2) the O-ring material is vulcanized solid such that it is impermeable to the fluid or gas, and (3) the O-ring material is resistant to degradation by the fluid or gas.
O-rings are one of the most common seals used in machine design because they are inexpensive, easy to make, reliable and have simple mounting requirements. They have been tested to seal up to 5000 psi (35 megapascals) of pressure. The maximum recommended pressure of an O-ring seal depends on the seal hardness and gland clearance.
|Material||HNBR, also can be NBR, NR, FKM, SIL, EPDM etc.|
|Color||Black, red, yellow, green, purple etc.|
|Size||AS568, and other standard sizes|
|Certificate||RoHs, ISO9001, ISO/IATF16949, FDA|
|Packing||Inside Polybag Outside Carton|
Export Markets: Global
Production Capacity: 100000/Day
1. Precise moulds: Our moulds are precise. We measure and make the moulds based on precise equipments. That will make the precision of your products just right.
2. High quality material: We only use the best materials. The rubber and matel we buy and use is with high quality. That is the basic of good quality products.
3. Good equipments: We equipments are very good and new. We buy all the equipment from the top equipment supplier in China or all over the world. That is also the key to make the products good.
4. Strict control: Every product will be through strict control and test before delivery. We try our best to make every product just fine.
Size Customized/standard and nonstandard
Brand Name o ring
Material NBR, HNBR, EPDM, SILICONE, FLS, FFPM, FFKM, FEP
Temperature Common: 20~50degree centigrade;
NBR(-40~120C), ACM(-30~180C), FKM(-25~300C)
Certificate FDA, RoHS, ISO9001
Color Red, Black, White, Clear, etc
Features Oil-resistant; Heat resistant; Abrasion-resistant; Aging resistant; Insulation; Acid and alkaline resistant;
Airtight; Shock absorption, etc.
Shipping 1) Small quantity, DHL/FedEx/UPS/TNT-express fee will be born
By the buyer;
2)Large quantity, sea/air freight
Delivery Time usual 7 days after confirmation of the sample or according to
Customers' order quantity
Payment Term T/T or PAYPAL or western union, 30% as deposit, balance before shipment
Packae Polybag and carton
Sample lead time 7-15 days
Carton Size L46cm*W33cm*H33cm or L33cm*W33cm*H33cm
OEM/ODM welcomeCompany Profile:
RuiChen Sealing Co., Ltd was established in 2006, with nearly 200 employees.The company is located in GuangDong province and JiangXi province, be named as, DongGuan RuiChen Sealing Co., Ltd. And ShangRao RuiChen Sealing Co., Ltd.
RuiChen is a reputable company that has passed the ISO9001 and ISO/IATF16949 quality system certification.Since its establishment, the company has always focused on the research and production of rubber seals, there are more than 6800 molds of o-rings and other kinds of sealing ring, especially o-rings, containing almost the basic common size.Our products are widely used in all kinds of auto parts, with the maturing of new energy technology and new energy cars put into use, our company is focus on the development and production of sealing products associated with new energy.
RuiChen aims to meet the needs of customers,meanwhile,we have good faith,keep a contract and guarantee the quality of products.In 2009, the company launched enterprise resource planning (ERP) system to monitor production plan, delivery date, quality statistics and analysis, etc., to further improve the overall control and customer service.It provide strong guarantee for long-term and stable service to our customers.
1,Are you manufacture or trading company ?
We are manufacture, we have two factories, one located in Shangrao City, Jiangxi Province, one in Dongguan City, Guangdong Province
2,Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you can get them for free,
only need to pay for the express cost.
3,What's the term of payment ?
Amount < US$2000, 100% paid in advance by paypal or T/T;
Amount >= US$2000, 30% paid in advance, 70% balance before shipment by T/T.
4,Can you produce OEM products ?
Yes, we can produce products by your drawing or samples.
5,What's your MOQ ?
If we have the products in stock , the quantity by your requirement, If we don't have them in stock:
NBR, SIL, SBR, EPDM, NR: 100 US$; PU, HNBR, FKM: 150 US$