Cap seal application:

·Hydraulic Cylinders
·Fluid Controls Metering Pistons
·Hydraulic Flight Controls
·Hydraulic Rod Seal
·Helicopter Flight Controls
·Landing Gear Seals
 

Introduction for our company 

Rui Chen Sealing Co., Ltd was built in 2006, now there are more than 300 staffs. The company has two branches in Guangdong and Jiangxi, They are Dongguan Rui Chen Sealing Co., Ltd. and Shangrao Rui Chen Sealing Co., Ltd.

We are professional manufacturer in rubber o-rings , rubber Quad Rings , rubber gasket , rubber ball ,  rubber grommet and other OEM rubber parts.About these rubber products ,we have almost 12,000 molds.In which ,o ring is over 6000 mold.

We have a complete and precise system for Our Meter Cap Seal production

Each step armed with professional workers and managers to finish and control .From the raw material test to delivery ,we marked the products with special batch number .If the products out of some problems ,we can easy tracking by the batch number,and find out which step is wrong.So as to we can supply the best after-sales service for you.

Process Flow:

Raw material test → Prescribe → Mixing Material → Cutting Material → First Cure → First Part Inspection → Casual Inspection → Burr Dealing → Eye Inspection → IPQC → Washing or Grinding → Post Cure → FQC → Packing

Packing & Delivery:

Packing: PE bag inside, Carton outside.
Carton size: 46cm*33cm*33cm, 51cm*33cm*33cm, 29cm*23cm*19cm
Delivery: Large quantity by ship, small quantity by air or express.

FAQ:

1,Are you manufacture or trading company ?
We are manufacture, we have two factories, one located in Shangrao City, Jiangxi Province, one in Dongguan City, Guangdong Province
2,Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you can get them for free,
only need to pay for the express cost.
3,What's the term of payment ?
Amount < US$2000,   100% paid in advance by paypal or T/T;
Amount >= US$2000,  30% paid in advance, 70% balance before shipment by T/T. 
4,Can you produce OEM products ?
Yes, we can produce products by your drawing or samples.
5,What's your MOQ ?
If we have the products in stock , the quantity by your requirement, If we don't have them in stock:
NBR, SIL, SBR, EPDM, NR: 100 US$;  PU, HNBR, FKM: 150 US$