The most important thing when installing the gasket is to avoid damage to the seal. In addition to the proper finish, safe chamfering, deburring, and proper tools, how to avoid dust floating on the surface of the seal during installation, How to properly position to avoid crushing of seals, clean hydraulic media, etc. when installed such as valve assembly. Specific attention should be paid to the following points: 1. Do not damage the sealing surface of the seal surface or the sealing line. The sealing performance of the flat seal depends on the upper and lower end faces; the sealing performance of the hydraulic seal depends on the lip line associated with the hole or shaft. These parts are made of temperature-resistant, corrosion-resistant and aging-resistant graphite, rubber seals
and fiber, which are both soft and resilient, and are easily damaged. Therefore, special protection is required during handling, installation and storage. And care, once damaged, it will often leave a lot of hidden dangers to the sealing part; 2. Do not install forcibly Some seals are placed in the grooved stuffing box, at this time, they need to be installed tightly, and the construction should not be rough, brutal, or move A large forcible installation is bound to destroy the original prefabricated structure of the seal, just like breaking the prefabricated concrete and filling it in the required position will inevitably lead to disaster. The installation of this type of seal must be very careful and careful, and the embedding must be carried out step by step; 3. Pay attention to balance and symmetry during installation. Place the seal at the position that just closes the effective sealing surface (or lip line). After the hard-sealed ball valve is put into use, it is necessary to do further observation and follow-up work to tighten the seals to prevent the collapse caused by micro-leakage due to changes in working conditions (such as pressurization) during the working process of the system. The use of high-purity graphite products for seals, photovoltaic equipment accessories, etc. is also an important combination. In many cases, after the valve matching user completes the process, even if the equipment has passed the test, there will still be problems after it is delivered to the user for a period of time. In general, it may be caused by improper use, such as the oil temperature is too high, causing the seal to burn. , you can check whether the cooling system is operating normally, the surface of the tie rod is worn and leaking, you can check whether there is debris in the hydraulic oil, and whether the filter is invalid. It can be seen from the above situations that even if users are willing to pay a higher price to buy high-quality seals, they must be controlled and monitored in all aspects to ensure that the investment will not be wasted. is necessary. The seals use high-purity graphite products, and photovoltaic equipment accessories now play an important role for enterprises and families. Company website: https://www.orksealing.com/
The point for Ruichen Sealing Co., Ltd. is that managerial processes are as important as other inputs in production and can create significant competitive advantage.
ORK is the vital link in the supply chain, adding value with efficient and cost-effective service and solutions for our customers and our suppliers.
It's the consistent experience that builds trust and loyalty. Creating a personality and platform that is scalable will allow you to evolve rubber seals with your consumers.
People tend to want what they perceive they cannot have. Making ORK seems exclusive or as if it will go out of stock if they don't act quickly often makes it more enticing to the consumer and increases the likelihood that they will buy in.
People are more likely to listen to an expert than just anyone off the street. So, while pack mentality is important, having a relevant expert speak to the effectiveness of a brand's product as ORK is essential to converting new consumers as well.