Matters needing attention in the use of fluorine rubber sealing ring

Matters needing attention in the use of sealing rings The main characteristics of fluororubber are high temperature resistance and chemical corrosion resistance, and have good anti-aging and anti-ozone properties, and the air permeability is also very low. Very good abrasion resistance even under very harsh working conditions. Fluoroelastomers can withstand operating temperatures of +200 degrees or below, and also allow short-term oil-free operation. Fluorine rubber seals can resist oil, hydraulic oil, fuel oil, lubricants, inorganic acids, aliphatic hydrocarbons and aromatic hydrocarbons, etc., but in the presence of compounds such as esters, ethers, ketones, certain amines and high temperature fluorine water hydrogen, etc., Viton should not be used. Under normal working conditions and working temperature below +200 degrees, fluororubber is very stable and harmless. However, when it encounters a high temperature above 300 degrees, such as the flame of a gas cutting gun, the fluororubber will release harmful gases. Inhalation of these gases or in the eyes can cause damage to human health. Once the fluororubber sealing ring is heated to a high temperature of more than 300 degrees, it will be dangerous even after cooling, so it must not be in any direct contact with the skin. If it is necessary to handle fluororubber sealed bearings that have been exposed to high temperature, the following safety precautions should be observed: (1) Wear goggles, protective gloves and suitable breathing apparatus during the entire disassembly process; (2) Put the removed sealing ring on the in an airtight plastic container and marked on the container“Corrosive material”; (3) Strictly follow the safety precautions in the material safety instructions. If you accidentally come into contact with a fluororubber sealing ring that has been exposed to high temperature, wash your hands with soap and plenty of water or rinse your eyes with plenty of water, and see a doctor immediately. If you inhale the harmful gas released by fluororubber, you must go to the hospital immediately. Want to know more: https://www.orksealing.com/
Ruichen Sealing Co., Ltd. is one of the world’s leading and most-trusted suppliers to the relevant markets.
See reviews of the latest trend in rubber seals industry at ORK Rubber Seal Products, and see the best that work in just minutes! Visit us right away!
Ruichen Sealing Co., Ltd. also has an extensive line of products as rubber seals.
If our brand is successful and consistent, it will be much easier to initially grab customers and encourage them to purchase rubber seals further.