OEM Customized EPDM Rubber Cap For Dustproof
Our factory is very professional at making OEM customized epdm rubber cap for dustproof. Of course , you can supply your technical drawings or samples.Description of EPDM:
Our Process Flow For OEM As bellow:1, Drawings or samples from customers.
|Material||EPDM(Ethylene propylene Rubber)|
|Advantage||1,Excellent Weathering Resistance|
|2,Excellent Ozone Resistance|
|3,Excellent Flame Resistance|
|4,Excellent Heat Resistance|
|5,Excellent Water Resistance|
|6,Excellent Oxygenated-Solvent Resistance|
|Disadvantage||1,Poor Oxygenated-Solvent Resistance|
| ||2,Poor Oil and Fuel Resistance|
|Temperature||-50ºC-150ºC, -50ºC-200ºC(Special formula)|
|Application||1,Shower Sealings or parts|
|1,Rubber parts for brake (brake) systems|
|2,Radiator (Automotive tank) seal|
From drawings or samples we can know the sizes and material.
2, Make mold (tooling) .
We make molds according to samples or drawings.
3, Make samples and send them to customers.
Before mass production, we have to make samples and confirm the samples.
4, Mass production after samples confirmed.
During mass production, we can control the quality.
5, Packing & shipment.
PE bag inside, Carton outside. Carton sizes: 46cm*33cm*33cm, 33cm*33cm*33cm, if large quantity we will
put the cartons on pallets.
6, After-Sales Service.
If any quality problems you can come back to me.FAQ:
1,Are you manufacture or trading company ?
We are manufacture, we have two factories, one located in Shangrao City, Jiangxi Province, one in Dongguan City, Guangdong Province
2,Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you can get them for free,
only need to pay for the express cost.
3,What's the term of payment ?
Amount < US$2000, 100% paid in advance by paypal or T/T;
Amount >= US$2000, 30% paid in advance, 70% balance before shipment by T/T.
4,Can you produce OEM products ?
Yes, we can produce products by your drawing or samples.
5,What's your MOQ ?
If we have the products in stock , the quantity by your requirement, If we don't have them in stock:
NBR, SIL, SBR, EPDM, NR: 100 US$; PU, HNBR, FKM: 150 US$