Rubber O Rings, Silicone O Ring, Fluorelastomer O RingBasic Info.: | NO. | Item | Description of the item |
| 01 | Standard of sizes | Standard: AS 568 , BS 1806, (D)JIS B 2401, Unstandard |
| 02 | Materials | Silicone, Viton, NBR, HNBR, EPDM, NR, SBR and so on |
| 03 | Color | Red, we can also make black, white, green, blue ext. |
| 04 | Hardness | 30~95 shore A, special formula: can be 95 shore A |
Packing:PE Bag Inside, Carton Outside
Standard: ISO9001/ IATF16949/ ROHS/ REACH/ FDA
Origin: Dongguan, Guangdong, China
HS Code:4016939000
Production Capacity:2000000PCS/Month
Product Description:
O-rings are torus, or doughnut-shaped rings, generally molded from elastomer. They are used primarily for sealing. And also used as light-duty, mechanical drive belts.
We carry extensive stock of O-rings in NBR, HNBR, Viton, EPDM and Silicone as well as special materials and grades for demanding applications in the Petrochemical, Gas, Water and Food industries to name but a few. Standard sizes stocked comply with AS568, DIN 3771, BS1806, BS4518, or ISO3601 specifications.
In designing an O-ring Seal, it is best to determine the O-ring compound first, as the selected compound may have significant influence on gland design parameters. Essentially, the application determines the rubber compound; The primary factor being the fluid to be sealed. The elastomer however, must also resist extrusion when exposed to the maximum anticipated system pressure and be capable of maintaining good physical properties through the full temperature range expected. In dynamic applications, the selected material must also have the toughness and abrasion resistance so important in reciprocating and rotary seals. Essentially, the application determines the rubber compound; The primary factor being the fluid to be sealed. The elastomer however, must also resist extrusion when exposed to the maximum anticipated system pressure and be capable of maintaining good physical properties through the full temperature range expected. In dynamic applications, the selected material must also have the toughness and abrasion resistance so important in reciprocating and rotary seals.
FAQ:1,Are you manufacture or trading company ?
We are manufacture, we have two factories, one located in Shangrao City, Jiangxi Province, one in Dongguan City, Guangdong Province
2,Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you can get them for free,
only need to pay for the express cost.
3,What's the term of payment ?
Amount < US$1000, 100% paid in advance by paypal or T/T;
Amount >= US$1000, 30% paid in advance, 70% paid before shipment by T/T.
4,Can you produce OEM products ?
Yes, we can produce products by your drawing or samples.
5,What's your MOQ ?
If we have the products in stock , the quantity by your requirement, If we don't have them in stock:
NBR, SIL, SBR, EPDM, NR: 100 US$; PU, HNBR, FKM: 150 US$
