Precautions for installation of hydraulic rubber seals_Rubber seals_Rubber seal manufacturers

Precautions for installation of hydraulic rubber seals 1. Check the relevant surfaces of the piston, cylinder barrel and installation guide sleeve, and make sure they are clean, free of burrs and edges. 2. The installation tools are required to be smooth, without edges and sharp corners to ensure that the rubber seals will not be damaged in any form during the installation process (special installation tools for hydraulic rubber seals should be used). 3. During installation, a small amount of grease can be applied to the rubber seal and the relevant surfaces of the cylinder to facilitate installation, but no grease is allowed between the rubber elastomer and the sliding seal ring, otherwise it will affect the sealing performance. 4. Whether it is vertical or horizontal installation, the coaxiality of the piston and the cylinder should be maintained. Excessive eccentricity may damage the seal. 5. The installation speed should not be too fast, otherwise the seal will be damaged. More information on rubber seals seals is here
Ruichen Sealing Co., Ltd. promises that we will manufature our products in accordance with the strictest quality standards.
Providing highly qualified rubber seals products and services, Ruichen Sealing Co., Ltd. is committed to helping clients make lasting improvements to their performance and realize their most important goals. Over the past decades, we’ve built a firm uniquely equipped to this task. Go to ORK Rubber Seal Products for more info.
The global market is estimated to reach a value of almost custom rubber seals in the next decade. have a robust position in the custom rubber seals market because of its proven high potency in custom rubber seals.