Automobile oil seal is a mechanical component used to seal grease (oil is a very common liquid substance in the transmission system, and also generally refers to a general liquid substance). Lubricating oil leaks. What are the functions of the car oil seal? Car oil seal, oil seal function, oil seal use. 1. Prevent sediment, dust, moisture, etc. from intruding into the bearing from the outside; 2. Limit the leakage of lubricating oil in the bearing. The requirements for the oil seal are that the dimensions (inner diameter, outer diameter and thickness) should meet the regulations; appropriate elasticity is required to properly clamp the shaft and play a sealing role; it must be heat-resistant, wear-resistant, strong, and resistant to media ( oil or water, etc.), long service life. Reasonable use of oil seals should pay attention to the following points: (1) Due to the design and structural reasons of shaft speed, high-speed oil seals should be used for high-speed shafts, low-speed oil seals should be used for low-speed shafts, and low-speed oil seals cannot be used for high-speed shafts. , and vice versa. (2) When the ambient temperature is high, polyacrylate or silicon, fluorine, and silicon fluorine rubber seals
should be selected. And should try to lower the oil temperature in the tank. When the operating temperature is too low, cold-resistant rubber seals should be used. (3) The oil seal with general pressure has poor pressure bearing capacity, and the oil seal will be deformed when the pressure is too large. Under the condition of excessive pressure, a pressure-resistant bearing ring or a reinforced pressure-resistant oil seal should be used. (4) The degree of eccentricity on the installation If the eccentricity of the oil seal and the shaft is too large, the sealing performance will be deteriorated, especially when the shaft speed is high. If the eccentricity is too large, the“W”Oil seal with shaped section. (5) The surface finish of the shaft directly affects the service life of the oil seal, that is, the higher the shaft finish, the longer the service life of the oil seal.
Ruichen Sealing Co., Ltd. has various branches in local businesses, servicing customers and helping to pull in traffic to those businesses.
To know more about and the market trends, go to ORK Rubber Seal Products.
To strengthen and grow our leadership position by providing rubber seals across a range of market segments, including custom rubber seals, and high-performance servers.
So, what's a manufacturer to do? Familiarize ourselves with producing rubber seals in various technologies.