Since 2006, Focus on rubber seals

What precautions should be taken when installing coated O-rings?

by:ORK      2022-11-13
What precautions should be taken when installing coated O ring manufactures? Like other sealing elements, coated O-rings should be used in strict accordance with the relevant regulations in the operating instructions. Therefore, during the installation process, there are many things to be aware of. Paying attention to these matters can make it form a better sealing environment and prevent premature leakage. Ineffective conditions. What should be paid attention to when installing coated O ring manufactures? The following is a brief introduction: 1. After the sealing ring is stored for a long time, the surface of the product will occasionally change color, that is, white powder will be produced on the surface. In this case, there is no need to worry. In general, it does not negatively affect product characteristics. Just clean the white powder before installation. 2. Avoid installing seals on needles or wires to avoid product deformation and lip damage. Clean the installed grooves and products to prevent impurities, particles and slag from remaining. 3. If you do not use it, try not to open the original packaging, so as not to store it in wet and cold, wet and cold. Dust. The product will be scrapped due to the intrusion of oil stains. If possible, it can be sealed and stored. 4. During installation, if the installation is difficult, you can choose to apply sealing material on the pipe groove and the sealing ring. 5. In the pipe trench, care should be taken to maintain the natural state of the sealing ring to prevent the goods from being distorted. 6. Try to avoid placing the sealing ring in direct sunlight or around high temperature pyrogens. High temperature and ultraviolet rays will cause the sealing ring to age. The coated O-ring can be said to be a sealing element with automatic double effect. During installation, the axial horizontal and radial pre-reduction can give its own initial sealing ability, and can also improve the sealing characteristics as the system pressure increases.
If you have a custom rubber seals business, be sure to choose a from Ruichen Sealing Co., Ltd.. After all, you need quality equipment in order to provide your customers with quality service.
Dedicated to bringing you professional rubber seals solutions and related products – from custom rubber seals to custom rubber seals, Ruichen Sealing Co., Ltd. is your rubber seals helper. Visit us at ORK Rubber Seal Products.
The above are only part of the examples regarding rubber seals, for more information, please click here ORK Rubber Seal Products.
But we do think that reckoning with supply chains of rubber seals is a really important step. Even super simple switches in material, or sourcing, or shipping, or worker benefits seems like good place to start.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...
Thank you for your enquiry. We will get back to you ASAP