Since 2006, Focus on rubber seals

What matters should be paid attention to when installing and using the sealing ring?

by:ORK      2022-11-13
Core Tip: There are some matters needing attention when installing and using the sealing ring. When replacing the sealing ring, the groove of the sealing ring should be strictly checked. In order to prevent oil leakage caused by damage, it must be operated according to the regulations. Below we will introduce the precautions for installing and using the sealing ring in detail: (1) Do not install in the wrong direction and damage the lip. If there are 50 on the lipsμScratches above m may cause oil leakage from the sealing ring. (2) Prevent forced installation. Can not be knocked in with a hammer, but use a special tool to first press the sealing ring into the seat hole, and then use a simple cylinder to protect the lip through the spline. Before installation, apply some lubricating oil to the lips to facilitate installation and prevent burns during initial operation. Pay attention to cleaning. (3) Prevent overdue use. The service life of the rubber seals sealing ring of the dynamic seal is generally 3000 ~ 5000h, and the new sealing ring should be replaced in time. (4) The size of the replacement sealing ring should be the same. (5) Avoid using old sealing rings. When using a new sealing ring, it is also necessary to carefully check its surface quality to ensure that there are no defects such as small holes, protrusions, cracks and grooves and that it has sufficient elasticity before use. (6) During installation, all parts of the opened hydraulic system should be cleaned strictly first, and special tools should be used to prevent fingers from being scratched by sharp metal edges. (7) When replacing the sealing ring, strictly check the groove of the sealing ring, remove the dirt, and polish the bottom of the groove. (8) In order to prevent oil leakage caused by damage, it must be operated in accordance with the regulations, and at the same time, the machine should not be overloaded for a long time or run in a relatively harsh environment. The sealing ring contains a lot of additives, which is easy to age and deteriorate and lose its sealing effect. In general, the storage time of the sealing ring should not exceed 1.5 years. When storing the seal, it is necessary to avoid sunlight, moisture or heat, and also avoid contact with acids and alkalis, and it is not allowed to string them with ropes or iron wires for storage. Company website: https://www.orksealing.com/
If you have a need for custom rubber seals rubber seals, like , and , you need to be able to find a dependable provider who you can trust when necessary.
We humbly ask you to use rubber seals and we guarantee that you would be in a great delight with using the product.
Our company specializes in selling rubber seals as well as providing relevant services.
Consumers like these are interested not just in rubber seals they will spend their money on, but also in the human and environmental impact of the supply chain that produces those goods.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...
Thank you for your enquiry. We will get back to you ASAP